![]() Also, the cost to produce the X10 is considerably more due to the materials and techniques required to hit the required tolerances. For the same reason, removing points requires a little more care and time in order to avoid overheating. Another factor is that more care is needed when gluing components, which is also due to the small diameter. The main disadvantage of the X10 is the fact that smaller diameter arrows at higher momentum potentials require better target materials to help prevent excess penetration or pass through. Most importantly, the X10 has a high ballistic coefficient – it correctly balances mass weight and momentum for better performance from recurve bows at longer distances, especially in windy conditions. The X10 is also designed with three distinct, custom spine zones- and specifically, a less stiff and- importantly- lighter tail section, which improves clearance and finger release consistency, compared to the much stiffer and heavier tail sections of parallel shafts (or even so-called “tri-spine” shafts from other makers). There are several advantages- the smaller diameter of the X10 shaft presents less surface area and a smaller cross section, which is very helpful in windy conditions at longer distances. The choice of wooden arrows depends on your bowand your own personal characteristics (write in case of questions).What advantage does the X10 have over other shafts? Are there any disadvantages? ![]() For optimum performance and highest quality, we suggest our hand-picked Premium model arrows which are the choice for many European and World Champions and medalists. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |